7.1 (1)
5.1 (1)
4.1

High-Density Polyethylene

Credentie Manufacture, Exports, Supplies premium quality reprocessed High-Density Polyethylene granules abbreviated as HDPE granules are commonly used in commodities plastic industries for various applications
Get Quote
Technical Specifications
Density
  • 0.94 – 0.96 g/cm3
Melting Temperature
  • 125 -135 °C
Melt Flow Index
  • 0.20 – 20.0 g/10 min
Tensile Yield Strength
  • 11.0 – 43.0 MPa
Flexural Yield Strength
  • 13.8 – 75.8 MPa

Disclaimer*: All above-mentioned values are in range and define specifications for range of products, also all other technical specifications can be provided for the specific grade and application.

Testing Methods
Melt Flow Index
  • ASTM D1238
  • ISO 1133
Tensile Strength
  • ASTM D 638
  • ISO 527-2
Flexural Strength
  • ASTM D 790
  • ISO 178

Disclaimer*: The list of all test and standards are not mentioned above. All Kinds of Physical, Mechanical, Thermal and Electrical tests are provided as per needs and requirements.

Grades
Blown Film/ Blow Molding
  • MFI – 0.35-0.40 gm/10mins
  • Density – 0.948-0.960 g/cm3
Blow Molding
  • MFI – 0.25-1.0 gm/10mins
  • Density – 0.952-0.954 g/cm3
Extrusion Molding
  • MFI – 0.3-1.20 gm/10mins
  • Density – 0.948 g/cm3
Injection Molding
  • MFI – 8-20 gm/10mins
  • Density – 0.952-0.960 g/cm3

Disclaimer*: All above-mentioned values are in range and define specifications for a range of products varying based on application

Applications Acc To Grades
Blown Film/ Blow Molding
  • Coextrusion
  • Liners
  • Blow Molding < 5Ltrs
  • Blow Molding up to 20 Ltrs
  • Lamitubes/ Shoulder
Blow Molding
  • Blow Molding up to 20 Ltrs
  • Medium Blow Molding Containers
  • Blow Molding containers up to 100 Ltrs
  • Corrugated Pipes
Extrusion Molding
  • Pressure Pipes
  • Telecom Ducts
Injection Molding
  • Crates
  • Luggage
  • Houseware
  • Storage Bins
  • Thin wall molding
Get Quote