Linear Low-Density Polyethylene

Credentie Manufacture, Exports, Supplies premium quality reprocessed Linear Low-Density Polyethylene granules abbreviated as LLDPE granules are commonly used in commodities plastic industries for various applications
Get Quote
Technical Specifications
Density
  • 0.870 – 0.935 g/cc
Melting Temperature
  • 95.0 – 120 °C
Melt Flow Index
  • 0.2 – 51.0 g/10 min
Tensile Yield Strength
  • 7.30 – 42.0 MPa
Flexural Yield Strength
  • 0.0165 – 0.950 GPa

Disclaimer*:All above-mentioned values are in range and define specifications for a range of products, also all other technical specifications can be provided for the specific grade and application.

Testing Methods
Melt Flow Index
  • ASTM D1238
  • ISO 1133
Tensile Strength
  • ASTM D 638
  • ISO 527-2
Flexural Strength
  • ASTM D 790
  • ISO 178

Disclaimer*: The list of all test and standards are not mentioned above. All Kinds of Physical, Mechanical, Thermal and Electrical tests are provided as per needs and requirements.

Grades
Blown Film/ Blow Molding
  • MFI   –  1.0-3.6 gm/10mins
  • Density  –  0.918 g/cc
Drip Lateral Tubing
  • MFI   –  1.4 gm/10mins
  • Density  –  0.920 g/cc
Roto Molding
  • MFI   –  3.4-4.5 gm/10mins
  • Density  –  0.935-0.940 g/cc
Extrusion Molding
  • MFI   –  7 gm/10mins
  • Density  –  0.924 g/cc
Injection Molding
  • MFI   –  20-50 gm/10mins
  • Density  –  0.924-0.926 g/cc

Disclaimer*:: All above-mentioned values are in range and define specifications for a range of products varying based on application.

Applications Acc To Grades
Blown/ Cast Film/ Thermal Lamination
  • Heavy Duty Blown Film applications
  • Blown Film applications
  • Cast Film applications
Drip Lateral Tubing
  • Drip Lateral Applications
Roto Molding
  • Septic
  • Chemical Storage Tanks
  • Overhead & Loft Tanks & Bins
  • Tanks Underground & Overhead tanks with High Rigidity
Extrusion Molding
  • Extrusion Coating in blends with LDPE
Injection Molding
  • Lids
  • Base resin for Masterbaches
Get Quote